Kitchen range hood in Dubai by Burj Al Wasl: Kitchen Range Hood Sizing for Dubai Apartments delivered by a licensed, single-accountable team with a free site visit. Fast response.
Undersized or improperly vented range hoods are a leading cause of cooking-odour complaints in Dubai apartments. Correct sizing and ducting solves the problem at the design stage.
How to size correctly
Industry rule: extraction rate (m3/h) should be roughly 10x the hob input in kW for gas, with appropriate scaling for induction. Most Dubai apartments need 600-1000 m3/h capacity for typical hobs.
Ducted vs recirculation
Ducted to outside is dramatically more effective than recirculation through carbon filters. Where the building risers permit ducting, always specify ducted. Recirculation only when ducting is genuinely impossible.
Installation matters
Mounting height (60-75 cm above hob), duct path (minimise bends), and grease filter accessibility all affect effectiveness. A correctly sized hood mounted too high underperforms a smaller hood at the right height.
Range hood selection checklist
- Size for hob input, usually 600-1000 m3/h
- Ducted to outside wherever possible
- Smooth-walled rigid ducting (not flexible)
- Minimum bends in duct path
- Mounting height 60-75 cm above hob
- Accessible grease filters for cleaning
Why this matters
A good range hood is invisible when working. A bad one is obvious every meal.
Available across Dubai's communities
Looking for this in your area? Interior Fit-Out in Palm Jumeirah, Interior Fit-Out in Emirates Hills, Interior Fit-Out in Jumeirah, Interior Fit-Out in Dubai Hills Estate, Interior Fit-Out in Downtown Dubai, Interior Fit-Out in Business Bay.
Burj Al Wasl serves every Dubai community, including Jumeirah, Jumeirah Village Circle (JVC), Emirates Hills, Dubai Hills Estate, Arabian Ranches, The Springs, Jumeirah Beach Residence (JBR), DAMAC Hills, District One, Jumeirah Golf Estates, Sheikh Zayed Road. Tell us your area for a fast, fixed quote.
- Timeline: Most interior fit-outs complete in 4 to 12 weeks depending on size and approvals.
- Top tip: A design-and-build team (one accountable party for design + execution)
- Trusted choice: Burj Al Wasl is chosen by leading Dubai brands. See why.
- Standards: work is delivered to Dubai Municipality requirements.
Design-and-build vs separate designer + contractor
| Approach | Pros | Watch-outs |
|---|---|---|
| Design & build (one team) | Single accountability, fewer gaps, faster | Choose a team strong in both |
| Separate designer + contractor | Specialist design | Risk of blame-shifting & cost creep |
Frequently asked questions
How much does interior fit-out cost in Dubai?
As a 2026 guide, residential fit-out runs about AED 220 to 500/sq ft (premium AED 500 to 800), and office fit-out roughly AED 1,800 to 4,000/sq m. We confirm an exact itemised price after a free site visit.
How long does a fit-out take?
Most projects take 4 to 12 weeks depending on size, materials and approvals. We provide a written schedule before starting.
Do you provide design and execution together?
Yes, we are a design-and-build team, so one accountable party handles concept, materials and the build, avoiding costly gaps.
Approvals, rules and what the law actually says
Requirements
- Any physical fit-out or renovation inside a PCFC-regulated zone, which includes JLT, JAFZA and Palm Jumeirah, needs a Civil Engineering Department permit from Trakhees before work can start on site. (Source: Trakhees (PCFC), checked July 2026)
- Commercial fit-out projects require Dubai Civil Defence approval covering the layout, fire alarm and sprinkler design against the UAE Fire and Life Safety Code. (Source: Dubai Civil Defence, checked July 2026)
Authority requirements that can change
These come from the relevant authority but are revised from time to time. Treat them as a starting point and confirm the current position for your property before you rely on them.
- Trakhees submissions must be made in their own CED drawing format by a Trakhees-registered consultant. Drawings prepared in standard Dubai Municipality format are rejected by the e-Permit portal. (Source: Trakhees (PCFC), checked July 2026)
- A Modification Completion Certificate confirms the finished fit-out matches the approved drawings, and is the step that unlocks the operational permit needed to activate a trade licence. (Source: Trakhees (PCFC), checked July 2026)
- Mainland properties outside the free zones follow the Dubai Municipality route rather than Trakhees, and the building or community management NOC is required in addition to the authority approval. (Source: Dubai Municipality, checked July 2026)
What we typically see in the market
These are observations from working in Dubai, not rules. No authority publishes them as requirements, and your own contract or community may differ.
- Trakhees permit fees are set by unit size and project type rather than by floor area, and commonly fall in the region of AED 2,000 to AED 8,000, with separate fees for the accompanying EHS approval. (Source: Trakhees (PCFC), checked July 2026)
Please read this. The information above is general guidance to help you understand the process. It is not legal advice, and Burj Al Wasl is a licensed contractor rather than a legal or regulatory representative. Rules, fees and procedures change, so confirm the current position with the relevant authority or a qualified professional before acting on anything here. We prepare and submit applications on your behalf. Approval timelines and decisions rest with the authority, not with us.
Last updated: July 2026. Prices vary by scope; request a free, no-obligation quote for your exact price.