Villa Extension & Structural Alteration in Harmony, Tilal Al Ghaf

Villa Extension & Structural Alteration in Harmony, Tilal Al Ghaf

Burj Al Wasl designs and builds villa extensions and structural alterations in Harmony, Tilal Al Ghaf, within its plot allowance and setbacks. We confirm feasibility at a free site visit before any design, verify what the structure can carry, and prepare the Dubai Development Authority permit, so what you pay to draw is what can be built.

Harmony 1, 2 and 3 are standalone four to six bedroom villas on substantially larger plots, with the garden wrapping the house, handed over from late 2023 through 2024, so owners are now well past handover and ready to personalise.

What can be extended in Harmony, Tilal Al Ghaf

A ground-floor family room or majlis, a first-floor addition where the structure carries it, an enclosed or covered outdoor room, or reconfigured internal structure to open the home up. What is possible is set by the built-up-area left on the plot, the setbacks to each boundary, and whether the existing structure can take the load, all confirmed at the survey before you pay for a single drawing.

The Tilal Al Ghaf approval route

An extension is structural, so it runs through the Majid Al Futtaim community NOC, submitted through the Belong by MAF portal, and then a Dubai Development Authority building permit, with the drawings and load calculations stamped by a licensed engineer. Many guides still name Dubai Municipality for this community, so we confirm the current route with community management, then prepare, submit and manage the approval before work starts on site.

Designed to match the home

An extension should read as part of the house, not an add-on bolted to the side, so we design it to match the existing elevation, roofline, window proportions and finishes, and build it to the same standard as the original. The join between old and new is where a poor extension shows, so we detail that junction carefully in both the structure and the finishes so the finished home looks like it was always this size.

Approvals, rules and what the law actually says

Authority requirements that can change

These come from the relevant authority but are revised from time to time. Treat them as a starting point and confirm the current position for your property before you rely on them.

• Tilal Al Ghaf is developed and governed by Majid Al Futtaim Communities. Majid Al Futtaim and Al-Futtaim Group are separate companies and have been since 1992, so approvals go to Majid Al Futtaim. (Source: Majid Al Futtaim (Tilal Al Ghaf), checked July 2026)
• Tilal Al Ghaf falls under Dubai Development Authority jurisdiction rather than Dubai Municipality. Submitting a fit-out application to Dubai Municipality instead of the DDA is a common procedural error that costs a full review cycle. (Source: Dubai Development Authority, checked July 2026)
• The route is two stage: a community NOC from Majid Al Futtaim Community Management first, then the fit-out or modification permit through the DDA e-services portal. (Source: Majid Al Futtaim (Tilal Al Ghaf), checked July 2026)
• The contractor must hold an active DDA fit-out licence and be registered with Majid Al Futtaim Community Management before site access is granted. (Source: Majid Al Futtaim (Tilal Al Ghaf), checked July 2026)
• A neighbour NOC is required where works touch a party wall, alter a shared boundary wall, or sit on the plot boundary. (Source: Majid Al Futtaim (Tilal Al Ghaf), checked July 2026)
• Purely interior cosmetic work does not need a permit: repainting within the existing layout, loose furniture, curtains, and like-for-like light fitting swaps that do not alter wiring. (Source: Dubai Development Authority, checked July 2026)