Landscaping & Garden Design in Amara, Plagette 32 & Serenity Mansions, Tilal Al Ghaf

Landscaping & Garden Design in Amara, Plagette 32 & Serenity Mansions, Tilal Al Ghaf

Burj Al Wasl designs and builds gardens in Amara, Plagette 32 & Serenity Mansions, Tilal Al Ghaf as one team: planting design and softscape, hard landscaping, irrigation, lighting, shade structures and pools. We prepare the ground properly and design around Dubai's recycled irrigation water, so the garden still looks right in its third summer, not only at handover.

Amara, Plagette 32 and Serenity Mansions are the newest Tilal Al Ghaf releases, handing over from late 2026 into 2027, so the smart move is to plan the fit-out and grounds before the keys arrive.

A Amara, Plagette 32 & Serenity Mansions, Tilal Al Ghaf garden built to last

The half that decides whether a garden lasts is below the surface: the sub-base and its compaction, the drainage and the soil, prepared before any paving or planting. Above it, planting chosen for the heat and the salinity that recycled irrigation brings, hard landscaping and shade for a plot you can actually use in summer, and lighting for the evening.

The recycled-water reality

Like most large Dubai landscapes, gardens here are often irrigated with treated or recycled water that carries more salt than tap water and concentrates it in the root zone under high evaporation. Left unmanaged, that salt is what kills planting in the second and third year, long after the contractor has gone. We choose salt-tolerant planting, prepare and drain the soil so salt can be flushed rather than trapped, and set the irrigation to leach on a schedule, so the garden stays healthy instead of slowly burning back.

A garden that works in layers

A good scheme works in layers: shade trees and palms for structure and relief from the sun, large shrubs for screening and privacy, mid-height planting for colour and texture, and lawn or groundcover at the base, each chosen for the heat and the water. Around the planting sit the things that make a Dubai garden usable, shade structures and pergolas, an outdoor kitchen or majlis, lighting for the evening, and paving that stays cool enough to walk on.

Outdoor living for a villa

The best gardens here are outdoor rooms you actually use, not just something to look at from inside. We design the seating, dining, shade and pool as one connected space suited to a villa plot, so the garden earns its place for most of the year rather than only in the cooler months, and the design accounts for how the light and heat move across the plot through the day.

Approvals and one team

Structural outdoor work, pools and boundary changes run through the Majid Al Futtaim community NOC, submitted through the Belong by MAF portal, and then a Dubai Development Authority permit where the work is structural. Many published guides still name Dubai Municipality for this community, so we confirm the current route with community management before submitting. One team then designs the garden, prepares the ground, plants and builds it, with a fixed written quote after a free site visit and no gap between the designer and the contractor.

Approvals, rules and what the law actually says

Authority requirements that can change

These come from the relevant authority but are revised from time to time. Treat them as a starting point and confirm the current position for your property before you rely on them.

• Tilal Al Ghaf is developed and governed by Majid Al Futtaim Communities. Majid Al Futtaim and Al-Futtaim Group are separate companies and have been since 1992, so approvals go to Majid Al Futtaim. (Source: Majid Al Futtaim (Tilal Al Ghaf), checked July 2026)
• Tilal Al Ghaf falls under Dubai Development Authority jurisdiction rather than Dubai Municipality. Submitting a fit-out application to Dubai Municipality instead of the DDA is a common procedural error that costs a full review cycle. (Source: Dubai Development Authority, checked July 2026)
• The route is two stage: a community NOC from Majid Al Futtaim Community Management first, then the fit-out or modification permit through the DDA e-services portal. (Source: Majid Al Futtaim (Tilal Al Ghaf), checked July 2026)
• The contractor must hold an active DDA fit-out licence and be registered with Majid Al Futtaim Community Management before site access is granted. (Source: Majid Al Futtaim (Tilal Al Ghaf), checked July 2026)
• A neighbour NOC is required where works touch a party wall, alter a shared boundary wall, or sit on the plot boundary. (Source: Majid Al Futtaim (Tilal Al Ghaf), checked July 2026)
• Purely interior cosmetic work does not need a permit: repainting within the existing layout, loose furniture, curtains, and like-for-like light fitting swaps that do not alter wiring. (Source: Dubai Development Authority, checked July 2026)